Mercurial > hg > jdk9-shenandoah

--- a/common/autoconf/basics.m4	Thu Nov 06 10:11:35 2014 -0800
+++ b/common/autoconf/basics.m4	Thu Nov 06 15:12:04 2014 -0800
@@ -684,8 +684,6 @@
   AC_SUBST(CONF_NAME, $CONF_NAME)
   AC_SUBST(OUTPUT_ROOT, $OUTPUT_ROOT)

-  # Most of the probed defines are put into config.h
-  AC_CONFIG_HEADERS([$OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in])
   # The spec.gmk file contains all variables for the make system.
   AC_CONFIG_FILES([$OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in])
   # The hotspot-spec.gmk file contains legacy variables for the hotspot make system.
@@ -694,8 +692,6 @@
   AC_CONFIG_FILES([$OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in])
   # The compare.sh is used to compare the build output to other builds.
   AC_CONFIG_FILES([$OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in])
-  # Spec.sh is currently used by compare-objects.sh
-  AC_CONFIG_FILES([$OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in])
   # The generated Makefile knows where the spec.gmk is and where the source is.
   # You can run make from the OUTPUT_ROOT, or from the top-level Makefile
   # which will look for generated configurations
--- a/common/autoconf/config.h.in	Thu Nov 06 10:11:35 2014 -0800
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,49 +0,0 @@
-/*
- * Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
- * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
- *
- * This code is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 only, as
- * published by the Free Software Foundation.  Oracle designates this
- * particular file as subject to the "Classpath" exception as provided
- * by Oracle in the LICENSE file that accompanied this code.
- *
- * This code is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * version 2 for more details (a copy is included in the LICENSE file that
- * accompanied this code).
- *
- * You should have received a copy of the GNU General Public License version
- * 2 along with this work; if not, write to the Free Software Foundation,
- * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
- * or visit www.oracle.com if you need additional information or have any
- * questions.
- */
-
-#define PACKAGE_NAME "openjdk"
-#define PACKAGE_TARNAME "openjdk"
-#define PACKAGE_VERSION "version-0.1"
-#define PACKAGE_STRING "openjdk version-0.1"
-#define PACKAGE_BUGREPORT "build-infra-dev@openjdk.java.net"
-#define PACKAGE_URL ""
-#define STDC_HEADERS
-#define HAVE_SYS_TYPES_H
-#define HAVE_SYS_STAT_H
-#define HAVE_STDLIB_H
-#define HAVE_STRING_H
-#define HAVE_MEMORY_H
-#define HAVE_STRINGS_H
-#define HAVE_INTTYPES_H
-#define HAVE_STDINT_H
-#define HAVE_UNISTD_H
-#define SIZEOF_INT_P 8
-#define HAVE_CUPS_CUPS_H
-#define HAVE_CUPS_PPD_H
-#define HAVE_LIBJPEG
-#define HAVE_LIBGIF
-#define HAVE_LIBZ
-#define HAVE_LIBM
-#define HAVE_ALTZONE
--- a/common/autoconf/generated-configure.sh	Thu Nov 06 10:11:35 2014 -0800
+++ b/common/autoconf/generated-configure.sh	Thu Nov 06 15:12:04 2014 -0800
@@ -3944,7 +3944,7 @@
     pulse)
       PKGHANDLER_COMMAND="sudo yum install pulseaudio-libs-devel" ;;
     x11)
-      PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel" ;;
+      PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel libXi-devel" ;;
     ccache)
       PKGHANDLER_COMMAND="sudo yum install ccache" ;;
   esac
@@ -4328,7 +4328,7 @@
 #CUSTOM_AUTOCONF_INCLUDE

 # Do not change or remove the following line, it is needed for consistency checks:
-DATE_WHEN_GENERATED=1414663067
+DATE_WHEN_GENERATED=1415179461

 ###############################################################################
 #
@@ -15338,9 +15338,6 @@
   OUTPUT_ROOT=$OUTPUT_ROOT


-  # Most of the probed defines are put into config.h
-  ac_config_headers="$ac_config_headers $OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in"
-
   # The spec.gmk file contains all variables for the make system.
   ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in"

@@ -15353,9 +15350,6 @@
   # The compare.sh is used to compare the build output to other builds.
   ac_config_files="$ac_config_files $OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in"

-  # Spec.sh is currently used by compare-objects.sh
-  ac_config_files="$ac_config_files $OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in"
-
   # The generated Makefile knows where the spec.gmk is and where the source is.
   # You can run make from the OUTPUT_ROOT, or from the top-level Makefile
   # which will look for generated configurations
@@ -43279,32 +43273,40 @@
   # Check for X Windows
   #

-  # Check if the user has specified sysroot, but not --x-includes or --x-libraries.
-  # Make a simple check for the libraries at the sysroot, and setup --x-includes and
-  # --x-libraries for the sysroot, if that seems to be correct.
-  if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
-    if test "x$SYSROOT" != "x"; then
-      if test "x$x_includes" = xNONE; then
-        if test -f "$SYSROOT/usr/X11R6/include/X11/Xlib.h"; then
-          x_includes="$SYSROOT/usr/X11R6/include"
-        elif test -f "$SYSROOT/usr/include/X11/Xlib.h"; then
-          x_includes="$SYSROOT/usr/include"
-        fi
-      fi
-      if test "x$x_libraries" = xNONE; then
-        if test -f "$SYSROOT/usr/X11R6/lib/libX11.so"; then
-          x_libraries="$SYSROOT/usr/X11R6/lib"
-        elif test "$SYSROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
-          x_libraries="$SYSROOT/usr/lib64"
-        elif test -f "$SYSROOT/usr/lib/libX11.so"; then
-          x_libraries="$SYSROOT/usr/lib"
-        fi
-      fi
-    fi
-  fi
-
-  # Now let autoconf do it's magic
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5
+  if test "x$X11_NOT_NEEDED" = xyes; then
+    if test "x${with_x}" != x; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: X11 is not used, so --with-x is ignored" >&5
+$as_echo "$as_me: WARNING: X11 is not used, so --with-x is ignored" >&2;}
+    fi
+    X_CFLAGS=
+    X_LIBS=
+  else
+    # Check if the user has specified sysroot, but not --x-includes or --x-libraries.
+    # Make a simple check for the libraries at the sysroot, and setup --x-includes and
+    # --x-libraries for the sysroot, if that seems to be correct.
+    if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
+      if test "x$SYSROOT" != "x"; then
+        if test "x$x_includes" = xNONE; then
+          if test -f "$SYSROOT/usr/X11R6/include/X11/Xlib.h"; then
+            x_includes="$SYSROOT/usr/X11R6/include"
+          elif test -f "$SYSROOT/usr/include/X11/Xlib.h"; then
+            x_includes="$SYSROOT/usr/include"
+          fi
+        fi
+        if test "x$x_libraries" = xNONE; then
+          if test -f "$SYSROOT/usr/X11R6/lib/libX11.so"; then
+            x_libraries="$SYSROOT/usr/X11R6/lib"
+          elif test "$SYSROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+            x_libraries="$SYSROOT/usr/lib64"
+          elif test -f "$SYSROOT/usr/lib/libX11.so"; then
+            x_libraries="$SYSROOT/usr/lib"
+          fi
+        fi
+      fi
+    fi
+
+    # Now let autoconf do it's magic
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5
 $as_echo_n "checking for X... " >&6; }


@@ -43497,7 +43499,7 @@
 $as_echo "libraries $x_libraries, headers $x_includes" >&6; }
 fi

-  if test "$no_x" = yes; then
+    if test "$no_x" = yes; then
   # Not all programs may use this symbol, but it does not hurt to define it.

 $as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h
@@ -43988,13 +43990,13 @@
 fi


-  # AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
-  # this doesn't make sense so we remove it.
-  if test "x$COMPILE_TYPE" = xcross; then
-    X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[^ ]*//g'`
-  fi
-
-  if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then
+    # AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
+    # this doesn't make sense so we remove it.
+    if test "x$COMPILE_TYPE" = xcross; then
+      X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[^ ]*//g'`
+    fi
+
+    if test "x$no_x" = xyes; then

   # Print a helpful message on how to acquire the necessary build dependency.
   # x11 is the help tag: freetype, cups, pulse, alsa etc
@@ -44025,34 +44027,34 @@
     fi
   fi

-    as_fn_error $? "Could not find X11 libraries. $HELP_MSG" "$LINENO" 5
-  fi
-
-  if test "x$OPENJDK_TARGET_OS" = xsolaris; then
-    OPENWIN_HOME="/usr/openwin"
-    X_CFLAGS="-I$SYSROOT$OPENWIN_HOME/include -I$SYSROOT$OPENWIN_HOME/include/X11/extensions"
-    X_LIBS="-L$SYSROOT$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
-        -L$SYSROOT$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR \
-        -R$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
-        -R$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR"
-  fi
-
-  ac_ext=c
+      as_fn_error $? "Could not find X11 libraries. $HELP_MSG" "$LINENO" 5
+    fi
+
+    if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+      OPENWIN_HOME="/usr/openwin"
+      X_CFLAGS="-I$SYSROOT$OPENWIN_HOME/include -I$SYSROOT$OPENWIN_HOME/include/X11/extensions"
+      X_LIBS="-L$SYSROOT$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
+          -L$SYSROOT$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR \
+          -R$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
+          -R$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR"
+    fi
+
+    ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu

-  OLD_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $SYSROOT_CFLAGS $X_CFLAGS"
-
-  # Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
-  for ac_header in X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h
+    OLD_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS $SYSROOT_CFLAGS $X_CFLAGS"
+
+    # Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
+    for ac_header in X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h
 do :
   as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
 ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "
-        # include <X11/Xlib.h>
-        # include <X11/Xutil.h>
+          # include <X11/Xlib.h>
+          # include <X11/Xutil.h>


 "
@@ -44060,48 +44062,15 @@
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
- X11_A_OK=yes
-else
-  X11_A_OK=no; break
-fi
-
-done
-
-
-  # If XLinearGradient isn't available in Xrender.h, signal that it needs to be
-  # defined in libawt_xawt.
-  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if XlinearGradient is defined in Xrender.h" >&5
-$as_echo_n "checking if XlinearGradient is defined in Xrender.h... " >&6; }
-  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-#include <X11/extensions/Xrender.h>
-int
-main ()
-{
-XLinearGradient x;
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-       X_CFLAGS="$X_CFLAGS -DSOLARIS10_NO_XRENDER_STRUCTS"
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-  CFLAGS="$OLD_CFLAGS"
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-
-
-  if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then
+ X11_HEADERS_OK=yes
+else
+  X11_HEADERS_OK=no; break
+fi
+
+done
+
+
+    if test "x$X11_HEADERS_OK" = xno; then

   # Print a helpful message on how to acquire the necessary build dependency.
   # x11 is the help tag: freetype, cups, pulse, alsa etc
@@ -44132,8 +44101,42 @@
     fi
   fi

-    as_fn_error $? "Could not find all X11 headers (shape.h Xrender.h XTest.h Intrinsic.h). $HELP_MSG" "$LINENO" 5
-  fi
+      as_fn_error $? "Could not find all X11 headers (shape.h Xrender.h XTest.h Intrinsic.h). $HELP_MSG" "$LINENO" 5
+    fi
+
+    # If XLinearGradient isn't available in Xrender.h, signal that it needs to be
+    # defined in libawt_xawt.
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if XlinearGradient is defined in Xrender.h" >&5
+$as_echo_n "checking if XlinearGradient is defined in Xrender.h... " >&6; }
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <X11/extensions/Xrender.h>
+int
+main ()
+{
+XLinearGradient x;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+         X_CFLAGS="$X_CFLAGS -DSOLARIS10_NO_XRENDER_STRUCTS"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+    CFLAGS="$OLD_CFLAGS"
+    ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+  fi # X11_NOT_NEEDED


@@ -44435,6 +44438,8 @@
 fi


+  # Need to specify explicitly since it needs to be overridden on some versions of macosx
+  FREETYPE_BASE_NAME=freetype
   FREETYPE_CFLAGS=
   FREETYPE_LIBS=
   FREETYPE_BUNDLE_LIB_PATH=
@@ -44475,8 +44480,8 @@
   fi
   # Now check if configure found a version of 'msbuild.exe'
   if test "x$BUILD_FREETYPE" = xyes && test "x$MSBUILD" == x ; then
-    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can't find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&5
-$as_echo "$as_me: WARNING: Can't find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Can not find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&5
+$as_echo "$as_me: WARNING: Can not find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src" >&2;}
     BUILD_FREETYPE=no
   fi

@@ -44576,30 +44581,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
   METHOD="--with-freetype-src"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -44904,30 +44934,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH"
   METHOD="--with-freetype"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -45493,30 +45548,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -45796,30 +45876,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -46090,30 +46195,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -46384,30 +46514,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -46679,30 +46834,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -46975,30 +47155,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib/x86_64-linux-gnu"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -47267,30 +47472,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib/i386-linux-gnu"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -47559,30 +47789,55 @@
   POTENTIAL_FREETYPE_LIB_PATH="$FREETYPE_BASE_DIR/lib32"
   METHOD="well-known location"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     { $as_echo "$as_me:${as_lineno-$LINENO}: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&5
 $as_echo "$as_me: Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD" >&6;}
-    FOUND_FREETYPE=yes
-
-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Compensating for missing symlink by using version 6 explicitly" >&5
+$as_echo "$as_me: Compensating for missing symlink by using version 6 explicitly" >&6;}
+      else
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&5
 $as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location." >&6;}
-      FOUND_FREETYPE=no
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&5
-$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location." >&6;}
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          { $as_echo "$as_me:${as_lineno-$LINENO}: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&5
+$as_echo "$as_me: Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location." >&6;}
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        { $as_echo "$as_me:${as_lineno-$LINENO}: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&5
+$as_echo "$as_me: Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead" >&6;}
       fi
     fi
   fi
@@ -48141,9 +48396,9 @@
   fi

       if test "x$OPENJDK_TARGET_OS" = xwindows; then
-        FREETYPE_LIBS="$FREETYPE_LIB_PATH/freetype.lib"
-      else
-        FREETYPE_LIBS="-L$FREETYPE_LIB_PATH -lfreetype"
+        FREETYPE_LIBS="$FREETYPE_LIB_PATH/$FREETYPE_BASE_NAME.lib"
+      else
+        FREETYPE_LIBS="-L$FREETYPE_LIB_PATH -l$FREETYPE_BASE_NAME"
       fi
     fi

@@ -51078,7 +51333,43 @@
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

-DEFS=-DHAVE_CONFIG_H
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+

 ac_libobjs=
 ac_ltlibobjs=
@@ -51512,15 +51803,11 @@
 "*) set x $ac_config_files; shift; ac_config_files=$*;;
 esac

-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac


 cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
 # Files that config.status was made for.
 config_files="$ac_config_files"
-config_headers="$ac_config_headers"

 _ACEOF

@@ -51541,15 +51828,10 @@
       --recheck    update $as_me by reconfiguring in the same conditions
       --file=FILE[:TEMPLATE]
                    instantiate the configuration file FILE
-      --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE

 Configuration files:
 $config_files

-Configuration headers:
-$config_headers
-
 Report bugs to <build-dev@openjdk.java.net>.
 OpenJDK home page: <http://openjdk.java.net>."

@@ -51612,18 +51894,7 @@
     esac
     as_fn_append CONFIG_FILES " '$ac_optarg'"
     ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h)
-    # Conflict between --help and --header
-    as_fn_error $? "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
-  --help | --hel | -h )
+  --he | --h |  --help | --hel | -h )
     $as_echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
@@ -51679,12 +51950,10 @@
 for ac_config_target in $ac_config_targets
 do
   case $ac_config_target in
-    "$OUTPUT_ROOT/config.h") CONFIG_HEADERS="$CONFIG_HEADERS $OUTPUT_ROOT/config.h:$AUTOCONF_DIR/config.h.in" ;;
     "$OUTPUT_ROOT/spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/spec.gmk:$AUTOCONF_DIR/spec.gmk.in" ;;
     "$OUTPUT_ROOT/hotspot-spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/hotspot-spec.gmk:$AUTOCONF_DIR/hotspot-spec.gmk.in" ;;
     "$OUTPUT_ROOT/bootcycle-spec.gmk") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/bootcycle-spec.gmk:$AUTOCONF_DIR/bootcycle-spec.gmk.in" ;;
     "$OUTPUT_ROOT/compare.sh") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/compare.sh:$AUTOCONF_DIR/compare.sh.in" ;;
-    "$OUTPUT_ROOT/spec.sh") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/spec.sh:$AUTOCONF_DIR/spec.sh.in" ;;
     "$OUTPUT_ROOT/Makefile") CONFIG_FILES="$CONFIG_FILES $OUTPUT_ROOT/Makefile:$AUTOCONF_DIR/Makefile.in" ;;

   *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
@@ -51698,7 +51967,6 @@
 # bizarre bug on SunOS 4.1.3.
 if $ac_need_defaults; then
   test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
 fi

 # Have a temporary directory for convenience.  Make it in the build tree
@@ -51886,116 +52154,8 @@
 cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 fi # test -n "$CONFIG_FILES"

-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
-  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_tt"; then
-    break
-  elif $ac_last_try; then
-    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any.  Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  for (key in D) D_is_set[key] = 1
-  FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
-  line = \$ 0
-  split(line, arg, " ")
-  if (arg[1] == "#") {
-    defundef = arg[2]
-    mac1 = arg[3]
-  } else {
-    defundef = substr(arg[1], 2)
-    mac1 = arg[2]
-  }
-  split(mac1, mac2, "(") #)
-  macro = mac2[1]
-  prefix = substr(line, 1, index(line, defundef) - 1)
-  if (D_is_set[macro]) {
-    # Preserve the white space surrounding the "#".
-    print prefix "define", macro P[macro] D[macro]
-    next
-  } else {
-    # Replace #undef with comments.  This is necessary, for example,
-    # in the case of _POSIX_SOURCE, which is predefined and required
-    # on some systems where configure will not decide to define it.
-    if (defundef == "undef") {
-      print "/*", prefix defundef, macro, "*/"
-      next
-    }
-  }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    "
+
+eval set X "  :F $CONFIG_FILES      "
 shift
 for ac_tag
 do
@@ -52203,30 +52363,7 @@
   esac \
   || as_fn_error $? "could not create $ac_file" "$LINENO" 5
  ;;
-  :H)
-  #
-  # CONFIG_HEADER
-  #
-  if test x"$ac_file" != x-; then
-    {
-      $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
-    } >"$ac_tmp/config.h" \
-      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
-      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      rm -f "$ac_file"
-      mv "$ac_tmp/config.h" "$ac_file" \
-	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
-    fi
-  else
-    $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
-      || as_fn_error $? "could not create -" "$LINENO" 5
-  fi
- ;;
+


   esac
--- a/common/autoconf/help.m4	Thu Nov 06 10:11:35 2014 -0800
+++ b/common/autoconf/help.m4	Thu Nov 06 15:12:04 2014 -0800
@@ -131,7 +131,7 @@
     pulse)
       PKGHANDLER_COMMAND="sudo yum install pulseaudio-libs-devel" ;;
     x11)
-      PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel" ;;
+      PKGHANDLER_COMMAND="sudo yum install libXtst-devel libXt-devel libXrender-devel libXi-devel" ;;
     ccache)
       PKGHANDLER_COMMAND="sudo yum install ccache" ;;
   esac
--- a/common/autoconf/libraries.m4	Thu Nov 06 10:11:35 2014 -0800
+++ b/common/autoconf/libraries.m4	Thu Nov 06 15:12:04 2014 -0800
@@ -91,85 +91,93 @@
   # Check for X Windows
   #

-  # Check if the user has specified sysroot, but not --x-includes or --x-libraries.
-  # Make a simple check for the libraries at the sysroot, and setup --x-includes and
-  # --x-libraries for the sysroot, if that seems to be correct.
-  if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
-    if test "x$SYSROOT" != "x"; then
-      if test "x$x_includes" = xNONE; then
-        if test -f "$SYSROOT/usr/X11R6/include/X11/Xlib.h"; then
-          x_includes="$SYSROOT/usr/X11R6/include"
-        elif test -f "$SYSROOT/usr/include/X11/Xlib.h"; then
-          x_includes="$SYSROOT/usr/include"
+  if test "x$X11_NOT_NEEDED" = xyes; then
+    if test "x${with_x}" != x; then
+      AC_MSG_WARN([X11 is not used, so --with-x is ignored])
+    fi
+    X_CFLAGS=
+    X_LIBS=
+  else
+    # Check if the user has specified sysroot, but not --x-includes or --x-libraries.
+    # Make a simple check for the libraries at the sysroot, and setup --x-includes and
+    # --x-libraries for the sysroot, if that seems to be correct.
+    if test "x$OPENJDK_TARGET_OS" = "xlinux"; then
+      if test "x$SYSROOT" != "x"; then
+        if test "x$x_includes" = xNONE; then
+          if test -f "$SYSROOT/usr/X11R6/include/X11/Xlib.h"; then
+            x_includes="$SYSROOT/usr/X11R6/include"
+          elif test -f "$SYSROOT/usr/include/X11/Xlib.h"; then
+            x_includes="$SYSROOT/usr/include"
+          fi
         fi
-      fi
-      if test "x$x_libraries" = xNONE; then
-        if test -f "$SYSROOT/usr/X11R6/lib/libX11.so"; then
-          x_libraries="$SYSROOT/usr/X11R6/lib"
-        elif test "$SYSROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
-          x_libraries="$SYSROOT/usr/lib64"
-        elif test -f "$SYSROOT/usr/lib/libX11.so"; then
-          x_libraries="$SYSROOT/usr/lib"
+        if test "x$x_libraries" = xNONE; then
+          if test -f "$SYSROOT/usr/X11R6/lib/libX11.so"; then
+            x_libraries="$SYSROOT/usr/X11R6/lib"
+          elif test "$SYSROOT/usr/lib64/libX11.so" && test "x$OPENJDK_TARGET_CPU_BITS" = x64; then
+            x_libraries="$SYSROOT/usr/lib64"
+          elif test -f "$SYSROOT/usr/lib/libX11.so"; then
+            x_libraries="$SYSROOT/usr/lib"
+          fi
         fi
       fi
     fi
-  fi

-  # Now let autoconf do it's magic
-  AC_PATH_X
-  AC_PATH_XTRA
+    # Now let autoconf do it's magic
+    AC_PATH_X
+    AC_PATH_XTRA

-  # AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
-  # this doesn't make sense so we remove it.
-  if test "x$COMPILE_TYPE" = xcross; then
-    X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[[^ ]]*//g'`
-  fi
+    # AC_PATH_XTRA creates X_LIBS and sometimes adds -R flags. When cross compiling
+    # this doesn't make sense so we remove it.
+    if test "x$COMPILE_TYPE" = xcross; then
+      X_LIBS=`$ECHO $X_LIBS | $SED 's/-R \{0,1\}[[^ ]]*//g'`
+    fi

-  if test "x$no_x" = xyes && test "x$X11_NOT_NEEDED" != xyes; then
-    HELP_MSG_MISSING_DEPENDENCY([x11])
-    AC_MSG_ERROR([Could not find X11 libraries. $HELP_MSG])
-  fi
+    if test "x$no_x" = xyes; then
+      HELP_MSG_MISSING_DEPENDENCY([x11])
+      AC_MSG_ERROR([Could not find X11 libraries. $HELP_MSG])
+    fi

-  if test "x$OPENJDK_TARGET_OS" = xsolaris; then
-    OPENWIN_HOME="/usr/openwin"
-    X_CFLAGS="-I$SYSROOT$OPENWIN_HOME/include -I$SYSROOT$OPENWIN_HOME/include/X11/extensions"
-    X_LIBS="-L$SYSROOT$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
-        -L$SYSROOT$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR \
-        -R$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
-        -R$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR"
-  fi
+    if test "x$OPENJDK_TARGET_OS" = xsolaris; then
+      OPENWIN_HOME="/usr/openwin"
+      X_CFLAGS="-I$SYSROOT$OPENWIN_HOME/include -I$SYSROOT$OPENWIN_HOME/include/X11/extensions"
+      X_LIBS="-L$SYSROOT$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
+          -L$SYSROOT$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR \
+          -R$OPENWIN_HOME/sfw/lib$OPENJDK_TARGET_CPU_ISADIR \
+          -R$OPENWIN_HOME/lib$OPENJDK_TARGET_CPU_ISADIR"
+    fi
+
+    AC_LANG_PUSH(C)
+    OLD_CFLAGS="$CFLAGS"
+    CFLAGS="$CFLAGS $SYSROOT_CFLAGS $X_CFLAGS"

-  AC_LANG_PUSH(C)
-  OLD_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS $SYSROOT_CFLAGS $X_CFLAGS"
-
-  # Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
-  AC_CHECK_HEADERS([X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h],
-      [X11_A_OK=yes],
-      [X11_A_OK=no; break],
-      [
-        # include <X11/Xlib.h>
-        # include <X11/Xutil.h>
-      ]
-  )
+    # Need to include Xlib.h and Xutil.h to avoid "present but cannot be compiled" warnings on Solaris 10
+    AC_CHECK_HEADERS([X11/extensions/shape.h X11/extensions/Xrender.h X11/extensions/XTest.h X11/Intrinsic.h],
+        [X11_HEADERS_OK=yes],
+        [X11_HEADERS_OK=no; break],
+        [
+          # include <X11/Xlib.h>
+          # include <X11/Xutil.h>
+        ]
+    )

-  # If XLinearGradient isn't available in Xrender.h, signal that it needs to be
-  # defined in libawt_xawt.
-  AC_MSG_CHECKING([if XlinearGradient is defined in Xrender.h])
-  AC_COMPILE_IFELSE(
-      [AC_LANG_PROGRAM([[#include <X11/extensions/Xrender.h>]],
-          [[XLinearGradient x;]])],
-      [AC_MSG_RESULT([yes])],
-      [AC_MSG_RESULT([no])
-       X_CFLAGS="$X_CFLAGS -DSOLARIS10_NO_XRENDER_STRUCTS"])
+    if test "x$X11_HEADERS_OK" = xno; then
+      HELP_MSG_MISSING_DEPENDENCY([x11])
+      AC_MSG_ERROR([Could not find all X11 headers (shape.h Xrender.h XTest.h Intrinsic.h). $HELP_MSG])
+    fi

-  CFLAGS="$OLD_CFLAGS"
-  AC_LANG_POP(C)
+    # If XLinearGradient isn't available in Xrender.h, signal that it needs to be
+    # defined in libawt_xawt.
+    AC_MSG_CHECKING([if XlinearGradient is defined in Xrender.h])
+    AC_COMPILE_IFELSE(
+        [AC_LANG_PROGRAM([[#include <X11/extensions/Xrender.h>]],
+            [[XLinearGradient x;]])],
+        [AC_MSG_RESULT([yes])],
+        [AC_MSG_RESULT([no])
+         X_CFLAGS="$X_CFLAGS -DSOLARIS10_NO_XRENDER_STRUCTS"])

-  if test "x$X11_A_OK" = xno && test "x$X11_NOT_NEEDED" != xyes; then
-    HELP_MSG_MISSING_DEPENDENCY([x11])
-    AC_MSG_ERROR([Could not find all X11 headers (shape.h Xrender.h XTest.h Intrinsic.h). $HELP_MSG])
-  fi
+    CFLAGS="$OLD_CFLAGS"
+    AC_LANG_POP(C)
+  fi # X11_NOT_NEEDED

   AC_SUBST(X_CFLAGS)
   AC_SUBST(X_LIBS)
@@ -264,7 +272,7 @@
   fi
   # Now check if configure found a version of 'msbuild.exe'
   if test "x$BUILD_FREETYPE" = xyes && test "x$MSBUILD" == x ; then
-    AC_MSG_WARN([Can't find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src])
+    AC_MSG_WARN([Can not find an msbuild.exe executable (you may try to install .NET 4.0) - ignoring --with-freetype-src])
     BUILD_FREETYPE=no
   fi

@@ -335,27 +343,50 @@
   POTENTIAL_FREETYPE_LIB_PATH="$2"
   METHOD="$3"

-  # First check if the files exists.
-  if test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
-    # We found an arbitrary include file. That's a good sign.
+  # Let's start with an optimistic view of the world :-)
+  FOUND_FREETYPE=yes
+
+  # First look for the canonical freetype main include file ft2build.h.
+  if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+    # Oh no! Let's try in the freetype2 directory. This is needed at least at Mac OS X Yosemite.
+    POTENTIAL_FREETYPE_INCLUDE_PATH="$POTENTIAL_FREETYPE_INCLUDE_PATH/freetype2"
+    if ! test -s "$POTENTIAL_FREETYPE_INCLUDE_PATH/ft2build.h"; then
+      # Fail.
+      FOUND_FREETYPE=no
+    fi
+  fi
+
+  if test "x$FOUND_FREETYPE" = xyes; then
+    # Include file found, let's continue the sanity check.
     AC_MSG_NOTICE([Found freetype include files at $POTENTIAL_FREETYPE_INCLUDE_PATH using $METHOD])
-    FOUND_FREETYPE=yes

-    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}freetype${SHARED_LIBRARY_SUFFIX}"
+    # Reset to default value
+    FREETYPE_BASE_NAME=freetype
+    FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
     if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME"; then
-      AC_MSG_NOTICE([Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location.])
-      FOUND_FREETYPE=no
+      if test "x$OPENJDK_TARGET_OS" = xmacosx \
+          && test -s "$POTENTIAL_FREETYPE_LIB_PATH/${LIBRARY_PREFIX}freetype.6${SHARED_LIBRARY_SUFFIX}"; then
+        # On Mac OS X Yosemite, the symlink from libfreetype.dylib to libfreetype.6.dylib disappeared. Check
+        # for the .6 version explicitly.
+        FREETYPE_BASE_NAME=freetype.6
+        FREETYPE_LIB_NAME="${LIBRARY_PREFIX}${FREETYPE_BASE_NAME}${SHARED_LIBRARY_SUFFIX}"
+        AC_MSG_NOTICE([Compensating for missing symlink by using version 6 explicitly])
+      else
+        AC_MSG_NOTICE([Could not find $POTENTIAL_FREETYPE_LIB_PATH/$FREETYPE_LIB_NAME. Ignoring location.])
+        FOUND_FREETYPE=no
+      fi
     else
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
         # On Windows, we will need both .lib and .dll file.
-        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/freetype.lib"; then
-          AC_MSG_NOTICE([Could not find $POTENTIAL_FREETYPE_LIB_PATH/freetype.lib. Ignoring location.])
+        if ! test -s "$POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib"; then
+          AC_MSG_NOTICE([Could not find $POTENTIAL_FREETYPE_LIB_PATH/${FREETYPE_BASE_NAME}.lib. Ignoring location.])
           FOUND_FREETYPE=no
         fi
       elif test "x$OPENJDK_TARGET_OS" = xsolaris \
           && test -s "$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR/$FREETYPE_LIB_NAME"; then
         # Found lib in isa dir, use that instead.
         POTENTIAL_FREETYPE_LIB_PATH="$POTENTIAL_FREETYPE_LIB_PATH$OPENJDK_TARGET_CPU_ISADIR"
+        AC_MSG_NOTICE([Rewriting to use $POTENTIAL_FREETYPE_LIB_PATH instead])
       fi
     fi
   fi
@@ -392,6 +423,8 @@
   AC_ARG_ENABLE(freetype-bundling, [AS_HELP_STRING([--disable-freetype-bundling],
       [disable bundling of the freetype library with the build result @<:@enabled on Windows or when using --with-freetype, disabled otherwise@:>@])])

+  # Need to specify explicitly since it needs to be overridden on some versions of macosx
+  FREETYPE_BASE_NAME=freetype
   FREETYPE_CFLAGS=
   FREETYPE_LIBS=
   FREETYPE_BUNDLE_LIB_PATH=
@@ -575,9 +608,9 @@
     if test "x$FREETYPE_LIBS" = x; then
       BASIC_FIXUP_PATH(FREETYPE_LIB_PATH)
       if test "x$OPENJDK_TARGET_OS" = xwindows; then
-        FREETYPE_LIBS="$FREETYPE_LIB_PATH/freetype.lib"
+        FREETYPE_LIBS="$FREETYPE_LIB_PATH/$FREETYPE_BASE_NAME.lib"
       else
-        FREETYPE_LIBS="-L$FREETYPE_LIB_PATH -lfreetype"
+        FREETYPE_LIBS="-L$FREETYPE_LIB_PATH -l$FREETYPE_BASE_NAME"
       fi
     fi
--- a/common/autoconf/spec.sh.in	Thu Nov 06 10:11:35 2014 -0800
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,36 +0,0 @@
-#
-# Copyright (c) 2011, 2012, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.  Oracle designates this
-# particular file as subject to the "Classpath" exception as provided
-# by Oracle in the LICENSE file that accompanied this code.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-CAT="@CAT@"
-CD=cd
-CP="@CP@"
-DIFF="@DIFF@"
-ECHO="@ECHO@"
-FIND="@FIND@"
-GREP="@GREP@"
-RM="@RM@"
-SED="@SED@"
-
-POST_STRIP_CMD="@POST_STRIP_CMD@"
--- a/common/bin/boot_cycle.sh	Thu Nov 06 10:11:35 2014 -0800
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,77 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-# The boot_cycle.sh script performs two complete image builds (no javadoc though....)
-# where the second build uses the first build as the boot jdk.
-#
-# This is useful to verify that the build is self hoisting and assists
-# in flushing out bugs. You can follow up with compare_objects.sh to check
-# that the two boot_cycle_?/images/j2sdk are identical. They should be.
-#
-# Usage:
-# Specify the configure arguments to boot_cycle.sh, for example:
-#
-#    sh common/bin/boot_cycle.sh --enable-debug --with-jvm-variants=server
-#
-# The same arguments will be used for both builds, except of course --with-boot-jdk
-# that will be adjusted to boot_cycle_1 for the second build.
-
-SCRIPT_DIR=`pwd`/`dirname $0`
-ROOT_DIR=`(cd $SCRIPT_DIR/../.. ; pwd)`
-BUILD_DIR=$ROOT_DIR/build
-mkdir -p $BUILD_DIR
-AUTOCONF_DIR=`(cd $SCRIPT_DIR/../autoconf ; pwd)`
-BOOT_CYCLE_1_DIR=$BUILD_DIR/boot_cycle_1
-BOOT_CYCLE_2_DIR=$BUILD_DIR/boot_cycle_2
-
-# Create the boot cycle dirs in the build directory.
-mkdir -p $BOOT_CYCLE_1_DIR
-mkdir -p $BOOT_CYCLE_2_DIR
-
-cd $BOOT_CYCLE_1_DIR
-# Configure!
-sh $AUTOCONF_DIR/configure "$@"
-# Now build!
-make images
-
-if ! test -x $BOOT_CYCLE_1_DIR/images/j2sdk-image/bin/java ; then
-    echo Failed to build the executable $BOOT_CYCLE_1_DIR/images/j2sdk-image/bin/java
-    exit 1
-fi
-
-cd $BOOT_CYCLE_2_DIR
-# Pickup the configure arguments, but drop any --with-boot-jdk=....
-# and add the correct --with-boot-jdk=...boot_cycle_1... at the end.
-ARGUMENTS="`cat $BOOT_CYCLE_1_DIR/configure-arguments|sed 's/--with-boot-jdk=[^ ]*//'` --with-boot-jdk=$BOOT_CYCLE_1_DIR/images/j2sdk-image"
-# Configure using these adjusted arguments.
-sh $AUTOCONF_DIR/configure $ARGUMENTS
-# Now build!
-make images
-
-if ! test -x $BOOT_CYCLE_2_DIR/images/j2sdk-image/bin/java ; then
-    echo Failed to build the final executable $BOOT_CYCLE_2_DIR/images/j2sdk-image/bin/java
-    exit 1
-fi
-
-
--- a/common/bin/compare-objects.sh	Thu Nov 06 10:11:35 2014 -0800
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,235 +0,0 @@
-#!/bin/bash
-#
-# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
-# DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
-#
-# This code is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 only, as
-# published by the Free Software Foundation.
-#
-# This code is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# version 2 for more details (a copy is included in the LICENSE file that
-# accompanied this code).
-#
-# You should have received a copy of the GNU General Public License version
-# 2 along with this work; if not, write to the Free Software Foundation,
-# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
-# or visit www.oracle.com if you need additional information or have any
-# questions.
-#
-
-# MANUAL
-#
-# ./common/bin/compare-objects.sh old_jdk_build_dir new_jdk_build_dir
-#
-# Compares object files
-#
-
-if [ "x$1" = "x-h" ] || [ "x$1" = "x--help" ] || [ "x$1" == "x" ]; then
-    echo "bash ./common/bin/compare-objects.sh old_jdk_build_dir new_jdk_build_dir <pattern>"
-    echo ""
-    echo "Compare object files"
-    echo ""
-    exit 10
-fi
-
-#######
-#
-# List of files (grep patterns) that are ignored
-#
-# 1) hotspot object files
-IGNORE="-e hotspot"
-
-# 2) various build artifacts: sizer.32.o sizer.64.o dummyodbc.o
-#    these are produced during build and then e.g run to produce other data
-#    i.e not directly put into build => safe to ignore
-IGNORE="${IGNORE} -e sizer.32.o -e sizer.64.o"
-IGNORE="${IGNORE} -e dummyodbc.o"
-IGNORE="${IGNORE} -e genSolarisConstants.o"
-IGNORE="${IGNORE} -e genUnixConstants.o"
-
-OLD="$1"
-NEW="$2"
-shift; shift
-PATTERN="$*"
-
-if [ -f $NEW/spec.sh ]; then
-    . $NEW/spec.sh
-elif [ -f $NEW/../../spec.sh ]; then
-    . $NEW/../../spec.sh
-elif [ -f $OLD/spec.sh ]; then
-    . $OLD/spec.sh
-elif [ -f $OLD/../../spec.sh ]; then
-    . $OLD/../../spec.sh
-else
-    echo "Unable to find spec.sh"
-    echo "Giving up"
-    exit 1
-fi
-
-export COMPARE_ROOT=/tmp/cimages.$USER/objects
-mkdir -p $COMPARE_ROOT
-
-(${CD} $OLD && ${FIND} . -name '*.o') > $COMPARE_ROOT/list.old
-(${CD} $NEW && ${FIND} . -name '*.o') > $COMPARE_ROOT/list.new
-
-# On macosx JobjC is build in both i386 and x86_64 variant (universial binary)
-#   but new build only builds the x86_64
-# Remove the 386 variants from comparison...to avoid "false" positives
-${GREP} -v 'JObjC.dst/Objects-normal/i386' $COMPARE_ROOT/list.old > $COMPARE_ROOT/list.old.new
-${CP} $COMPARE_ROOT/list.old $COMPARE_ROOT/list.old.full
-${CP} $COMPARE_ROOT/list.old.new $COMPARE_ROOT/list.old
-
-findnew() {
-    arg_1=$1
-    arg_2=$2
-
-    # special case 1 unpack-cmd => unpackexe
-    arg_1=`${ECHO} $arg_1 | ${SED} 's!unpack-cmd!unpackexe!g'`
-    arg_2=`${ECHO} $arg_2 | ${SED} 's!unpack-cmd!unpackexe!g'`
-
-    # special case 2 /JObjC.dst/ => /libjobjc/
-    arg_1=`${ECHO} $arg_1 | ${SED} 's!/JObjC.dst/!/libjobjc/!g'`
-    arg_2=`${ECHO} $arg_2 | ${SED} 's!/JObjC.dst/!/libjobjc/!g'`
-
-    full=`${ECHO} $arg_1 | ${SED} 's!\.!\\\.!g'`
-    medium=`${ECHO} $arg_1 | ${SED} 's!.*/\([^/]*/[^/]*\)!\1!'`
-    short=`${ECHO} $arg_2 | ${SED} 's!\.!\\\.!g'`
-    if [ "`${GREP} -c "/$full" $COMPARE_ROOT/list.new`" -eq 1 ]
-    then
-	${ECHO} $NEW/$arg_1
-	return
-    fi
-
-    if [ "`${GREP} -c "$medium" $COMPARE_ROOT/list.new`" -eq 1 ]
-    then
-	${GREP} "$medium" $COMPARE_ROOT/list.new
-	return
-    fi
-
-    if [ "`${GREP} -c "/$short" $COMPARE_ROOT/list.new`" -eq 1 ]
-    then
-	${GREP} "/$short" $COMPARE_ROOT/list.new
-	return
-    fi
-
-    # old style has "dir" before obj{64}
-    dir=`${ECHO} $arg_1 | ${SED} 's!.*/\([^/]*\)/obj[64]*.*!\1!g'`
-    if [ -n "$dir" -a "$dir" != "$arg_1" ]
-    then
-	if [ "`${GREP} $dir $COMPARE_ROOT/list.new | ${GREP} -c "/$short"`" -eq 1 ]
-	then
-	    ${GREP} $dir $COMPARE_ROOT/list.new | ${GREP} "/$short"
-	    return
-	fi
-
-	# Try with lib$dir/
-	if [ "`${GREP} "lib$dir/" $COMPARE_ROOT/list.new | ${GREP} -c "/$short"`" -eq 1 ]
-	then
-	    ${GREP} "lib$dir/" $COMPARE_ROOT/list.new | ${GREP} "/$short"
-	    return
-	fi
-
-	# Try with $dir_objs
-	if [ "`${GREP} "${dir}_objs" $COMPARE_ROOT/list.new | ${GREP} -c "/$short"`" -eq 1 ]
-	then
-	    ${GREP} "${dir}_objs" $COMPARE_ROOT/list.new | ${GREP} "/$short"
-	    return
-	fi
-    fi
-
-    # check for some specifics...
-    for i in demo hotspot jobjc
-    do
-	if [ "`${ECHO} $full | ${GREP} -c $i`" -gt 0 ]
-	then
-	    if [ "`${GREP} $i $COMPARE_ROOT/list.new | ${GREP} -c "/$short"`" -eq 1 ]
-	    then
-		${GREP} $i $COMPARE_ROOT/list.new | ${GREP} "/$short"
-		return
-	    fi
-	fi
-    done
-
-    # check for specific demo
-    demo=`${ECHO} $arg_1 | ${SED} 's!.*/demo/jvmti/\([^/]*\)/.*!\1!g'`
-    if [ -n "$demo" -a "$dir" != "$demo" ]
-    then
-	if [ "`${GREP} $demo $COMPARE_ROOT/list.new | ${GREP} -c "/$short"`" -eq 1 ]
-	then
-	    ${GREP} $demo $COMPARE_ROOT/list.new | ${GREP} "/$short"
-	    return
-	fi
-    fi
-
-    return
-}
-
-compare() {
-    old=$1
-    new=$2
-    ${DIFF} $old $new > /dev/null
-    res=$?
-    if [ $res -eq 0 ]
-    then
-	${ECHO} 0
-	return
-    fi
-
-    # check if stripped objects gives equality
-    ${CP} $old $COMPARE_ROOT/`basename $old`.old
-    ${CP} $new $COMPARE_ROOT/`basename $old`.new
-    ${POST_STRIP_CMD} $COMPARE_ROOT/`basename $old`.old $COMPARE_ROOT/`basename $old`.new > /dev/null 2>&1
-    ${DIFF} $COMPARE_ROOT/`basename $old`.old $COMPARE_ROOT/`basename $old`.new > /dev/null
-    res=$?
-    ${RM} $COMPARE_ROOT/`basename $old`.old $COMPARE_ROOT/`basename $old`.new
-    if [ $res -eq 0 ]
-    then
-	${ECHO} S
-	return
-    fi
-
-    name=`basename $1 | ${SED} 's!\.o!!'`
-    cntold=`strings $old | ${GREP} -c $name`
-    cntnew=`strings $new | ${GREP} -c $name`
-
-    if [ $cntold -gt 0 -a $cntnew -gt 0 ]
-    then
-	${ECHO} F
-	return
-    fi
-
-    ${ECHO} 1
-}
-
-for F in `${CAT} $COMPARE_ROOT/list.old`
-do
-    if [ "${IGNORE}" ] && [ "`${ECHO} $F | ${GREP} ${IGNORE}`" ]
-    then
-	#
-	# skip ignored files
-        #
-	continue;
-    fi
-
-    if [ "$PATTERN" ] && [ `${ECHO} $F | ${GREP} -c $PATTERN` -eq 0 ]
-    then
-	continue;
-    fi
-
-    f=`basename $F`
-    o=$OLD/$F
-    n=`findnew $F $f`
-
-    if [ "$n" ]
-    then
-	n="$NEW/$n"
-	${ECHO} `compare $o $n` : $f : $o : $n
-    else
-	${ECHO} "- : $f : $o "
-    fi
-done
--- a/make/Javadoc.gmk	Thu Nov 06 10:11:35 2014 -0800
+++ b/make/Javadoc.gmk	Thu Nov 06 15:12:04 2014 -0800
@@ -1,4 +1,4 @@
-# Copyright (c) 1997, 2013, Oracle and/or its affiliates. All rights reserved.
+# Copyright (c) 1997, 2014, Oracle and/or its affiliates. All rights reserved.
 # DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
 #
 # This code is free software; you can redistribute it and/or modify it
@@ -336,6 +336,14 @@
 #################################################################

 #
+# Load custom Javadoc rules
+#
+
+$(eval $(call IncludeCustomExtension, , Javadoc.gmk))
+
+#################################################################
+
+#
 # Default target is same as docs target, create core api and all others it can
 #
--- a/make/Main.gmk	Thu Nov 06 10:11:35 2014 -0800
+++ b/make/Main.gmk	Thu Nov 06 15:12:04 2014 -0800
@@ -514,7 +514,7 @@
 # If the output directory was created by configure and now becomes empty, remove it as well.
 dist-clean: clean
 	($(CD) $(OUTPUT_ROOT) && $(RM) -r *spec.gmk config.* configure-arguments \
-	    Makefile compare.sh spec.sh tmp javacservers)
+	    Makefile compare.sh tmp javacservers)
 	$(if $(filter $(CONF_NAME),$(notdir $(OUTPUT_ROOT))), \
 	  if test "x`$(LS) $(OUTPUT_ROOT)`" != x; then \
 	    $(ECHO) "Warning: Not removing non-empty configuration directory for '$(CONF_NAME)'" ; \
--- a/modules.xml	Thu Nov 06 10:11:35 2014 -0800
+++ b/modules.xml	Thu Nov 06 15:12:04 2014 -0800
@@ -792,17 +792,8 @@
       <name>javax.management.timer</name>
     </export>
     <export>
-      <name>com.sun.jmx.defaults</name>
-      <to>jdk.snmp</to>
-    </export>
-    <export>
-      <name>com.sun.jmx.mbeanserver</name>
-      <to>jdk.snmp</to>
-    </export>
-    <export>
       <name>sun.management</name>
       <to>jdk.jconsole</to>
-      <to>jdk.snmp</to>
     </export>
   </module>
   <module>